Appendix A Parameter List
A.4 Connectivity Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
816
A.4 Connectivity Management
This section provides information on the parameters of the following actions for connectivity management.
• Host Affinity Management
• Host Group Management
• CA Port Group Management
• LUN Group Management
• Host Response Management
• Host-LU QoS Management
• NAS Management
A.4.1 Host Affinity Management
A.4.1.1 Create Host Affinity
For details about this function, refer to "4.1.1 Create Host Affinity" (page 338).
For the factory default settings for this function, refer to "Appendix B Create Host Affinity" (page 993)
.
● Target Connection Setting
• Target Connection
● Select CA Port
• Checkbox to select a CA port
Description Select the connection target from "Host Group - CA Port Group" or "Host - CA Port".
Input condition/
Display contents
• Host Group - CA Port Group
Specify a "Host Group", a "CA Port Group", and a "LUN Group" to create a host affinity.
• Host - CA Port
Specify a "Host", a "CA Port", and a "LUN Group" to create a host affinity.
Description To enable the paths between hosts and ports, select the port checkboxes. To disable the
paths, clear the checkboxes.
Select this item only when the connection target is "Host Group - CA Port Group".
Input condition/
Display contents
Checkbox
• Selected
• Cleared
To Next Page
Loading...
