ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
590
Chapter 7
Advanced Copy Management
This chapter describes Advanced Copy management.
When using functions in the Action area, select the desired function from the Action area that is displayed in
the status display screen.
The functions in the Action area for Advanced Copy can be performed from the following display functions:
Functions in the Action area for Advanced Copy Display function
Start SnapOPC+
• Advanced Copy (Basic Information)
• Advanced Copy (All Local Sessions)
• SnapOPC+ in Local Copy
Stop Copy Session
• Advanced Copy (Basic Information)
• Advanced Copy (All Local Sessions)
• EC in Local Copy
• OPC in Local Copy
• QuickOPC in Local Copy
• SnapOPC in Local Copy
• SnapOPC+ in Local Copy
• Monitor in Local Copy
• Advanced Copy (All Remote Sessions)
• REC in Remote Copy
Register Advanced Copy License
• Setting (Advanced Copy)
Delete Advanced Copy License
Modify EC/OPC Priority
Modify Copy Table Size
Modify Copy Parameters
• Snap Data Pool in Setting (Advanced Copy)
REC Management -
Export Storage Information
• Copy Path in Setting (Advanced Copy)
Set Copy Path
Delete All Copy Path
Export All Copy Path
Measure Round Trip Time
Modify REC Buffer
• REC Buffer in Setting (Advanced Copy)
Create REC Disk Buffer
• REC Disk Buffer in Setting (Advanced Copy)
Assign REC Disk Buffer
• REC Buffer in Setting (Advanced Copy)
Delete REC Disk Buffer
• REC Disk Buffer in Setting (Advanced Copy)
Format REC Disk Buffer
Modify REC Multiplicity
• Copy Path in Setting (Advanced Copy)
Set REC Bandwidth Limit
To Next Page
Loading...
