Fujitsu Eternus DX600 S3 - REC Management; Export Storage Information

Chapter 7 Advanced Copy Management
7.8 REC Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
610
7.8 REC Management
This section describes REC management.
REC management provides the following functions:
• Export Storage Information
• Set Copy Path
• Delete All Copy Path
• Export All Copy Path
• Measure Round Trip Time
• Modify REC Buffer
• Create REC Disk Buffer
• Assign REC Disk Buffer
• Delete REC Disk Buffer
• Format REC Disk Buffer
• Modify REC Multiplicity
• Set REC Bandwidth Limit
7.8.1 Export Storage Information
This function exports the storage system information, and saves the information in a file.
The saved file can be used as storage system information when creating a copy path, so that manual
registration of the storage system information will not be required.
The procedure to export the REC device information is as follows:
Procedure
1 Click [Export Storage Info] in [Action].
The ETERNUS DX60 S3 does not support REC management functions.
• Registering the Advanced Copy function license or the Storage Cluster function license is required to use
this function.
• The bandwidth limit for a copy path cannot be exported.