Fujitsu Eternus DX600 S3 - Stop Balancing Thin Provisioning Volume

Chapter 3 Volume Management
3.7 TPV Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
293
3.7.6 Stop Balancing Thin Provisioning Volume
This function stops TPV balancing
The procedure to stop balancing of the Thin Provisioning Volume is as follows:
Procedure
1 Select the volume for which balancing is to be stopped and click [Stop Balancing] in
[Action].
 A confirmation screen appears.
2 Click the [OK] button.
 TPV balancing stops.
3 Click the [Done] button to return to the [Balancing Thin Provisioning Volume] screen.
End of procedure
• This function cannot be used when the TPV balancing is not being performed.
• This function cannot be used when the specified TPV balancing is already complete.
When TPV balancing is stopped, data in volumes that are not balanced yet can be accessed normally.