Appendix A Parameter List
A.1 System Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
761
A.1.12 Remote Support Management
A.1.12.1 Setup Remote Support
For details about this function, refer to "1.13.2 Setup Remote Support" (page 193).
For the factory default settings for this function, refer to "Appendix B Setup Remote Support" (page 984)
.
● Information File
• Customer Information File
• Communication Environment Information File
● Customer Information
● Communication Environment Information
Description Import the "Customer Information File", which was created using the REMCS
Environment Setup Assist Tool (REMCS ESAT), to the ETERNUS DX.
Click the [Browse...] button to specify the "Customer Information File", or directly input
the path to the "Customer Information File".
Input condition/
Display contents
• Click the [Browse...] button to specify the "Customer Information File"
• Directly input the path to the "Customer Information File"
Description Import the "Communication Environment Information File", which was created using the
REMCS ESAT, to the ETERNUS DX.
Click the [Browse...] button to specify the "Communication Environment Information
File", or directly input the path to the "Communication Environment Information File".
Input condition/
Display contents
• Click the [Browse...] button to specify the "Communication Environment Information
File"
• Directly input the path to the "Communication Environment Information File"
When importing Remote Support settings to the ETERNUS DX all at once, click the [Browse...] button to specify the
location where the settings file has been stored, and click the [Import] button.
For setting items, refer to Step 2 in "1.13.3 Update Customer Information" (page 196).
For setting items, refer to Step 2 in "1.13.4 Update Communication Environment Information" (page 198).
To Next Page
Loading...
