Fujitsu Eternus DX600 S3 - NAS Management; Create Shared Folder

Chapter 4 Connectivity Management
4.8 NAS Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
503
4.8 NAS Management
This section describes NAS management.
NAS management provides the following functions:
• Create Shared Folder
• Delete Shared Folder
• Modify Shared Folder
• Create NAS Interface
• Delete NAS Interface
• Modify NAS Interface
• Change NAS Server Name
• Set DNS Server
• Set Authentication Server
• Add Quota Setting
• Delete Quota Setting
• Modify Quota Setting
4.8.1 Create Shared Folder
This function creates shared folders.
Specify the access protocols and hosts which are allowed or denied access to each shared folder.
This function is used in a Unified Storage environment.
Number of shared folders that can be registered
*1: The maximum number of shared folders may be less in some operating environments.
The ETERNUS DX60 S3, the ETERNUS DX8700 S3/DX900 S3, and the ETERNUS DX200F do not support the NAS
management functions.
Protocol Number of shared folders per ETERNUS DX (*1)
Windows CIFS 256
UNIX NFS 256
Total number of Windows CIFS and UNIX NFS 256