Fujitsu Eternus DX600 S3 - Page 96

Chapter 1 System Management
1.7 User Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
96
For details on the parameters for this function, refer to "A.1.6.4 Modify Role" (page 702).
The procedure to modify a user role is as follows:
Procedure
1 Select the role to be modified, and click [Modify Role] in [Action].
2 Change the role settings.
The main setting item is as follows.
● Target Role
• Policies
3 Click the [Modify] button.
 A confirmation screen appears.
4 Click the [OK] button.
 Modification of the role settings starts.
5 Click the [Done] button to return to the [Define Role] screen.
End of procedure
• Multiple policies can be allocated to one role.
• The modified role can be granted to the user account using the procedure in "1.7.1 Setup User Account"
(page 84).
• Refer to "Policy" (page 92)
for available policies.