Chapter 1 System Management
1.11 Key Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
167
2 Specify the key management device name.
The main setting item is as follows.
● Key Management Machine Name Setting
• Key Management Machine Name
3 Click the [Set] button.
A confirmation screen appears.
4 Click the [OK] button.
Setting of the key management device name starts.
5 Click the [Done] button to return to the [Key Management] screen.
• Do not change the key management device name after the key status changes to "Normal". The
key status can be checked on the [Key Group] screen. Refer to "Key Group" in "ETERNUS Web GUI
User’s Guide (Operation)" for details.
• If the entered "Key Management Machine Name" does not satisfy the input conditions, an error
screen appears. If this occurs, check the parameter settings.
To Next Page
Loading...
