Chapter 2 Component Management
2.3 Assign Dedicated Hot Spare
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
232
3 Click the [OK] button.
Registration of the Dedicated Hot Spare starts.
4 Click the [Done] button to return to the [Drives] screen.
For "Drive Type" in the "Assign RAID Group" field, the drive type registered in the RAID group is
displayed. If multiple drive types are used in the ETERNUS DX, the drive type is displayed as described
below:
• If only "Online" type drives are used or if both "Online" and "Nearline" type drives are used, "Online"
is displayed.
• If only "Online SED" type drives are used or if both "Online SED" and "Nearline SED" type drives are
used, "Online SED" is displayed.
• If a single SSD type (SSD-M/SSD) is used or if multiple SSD types (SSD-M/SSD) are used, "SSD" is
displayed.
To Next Page
Loading...
