Chapter 2 Component Management
2.6 Add Drive Enclosure
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
241
9 Connect the SAS cables by following the connection procedure and then click the [Next >>]
button.
The [Enable IOM#1] screen appears.
10 Activate the IOM#1 according to the installation procedure and click the [Next >>] button.
The [Finish] screen appears.
11 Click the [Done] button to return to the [Drive Enclosure] screen.
To Next Page
Loading...
