Fujitsu Eternus DX600 S3 - Page 275

Chapter 3 Volume Management
3.3 Rename Volume
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
275
3 Click the [Rename] button.
 A confirmation screen appears.
4 Click the [OK] button.
 Renaming of the volume starts.
5 Click the [Done] button to return to the [Volume] screen.
End of procedure
If an error screen appears under the following conditions, check the parameter settings.
• When the volume name is not input
• When the "Name" does not satisfy the input conditions
• When the "Name" overlaps with an existing volume name (when selecting a single volume)
• When the "Start of Suffix" is not input (when selecting multiple volumes)
• When the "Start of Suffix" does not satisfy the input conditions (when selecting multiple volumes)