Chapter 1 System Management
1.4 System Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
33
2 Specify the parameters.
The main setting items are as follows.
● Set the Name of this Storage System
• Name
• Installation Location
• Administrator
• Description
3 Click the [Set] button.
A confirmation screen appears.
4 Click the [OK] button.
Setting of the storage system name starts.
5 Click the [Done] button to return to the [System Settings] screen.
If an error screen appears under the following conditions, check the parameter settings.
• The "Name" is not entered
• A parameter does not satisfy the input conditions exists
To Next Page
Loading...
