Chapter 3 Volume Management
3.19 Snapshot Management for NAS Volumes
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
330
2 Input the Snapshot information.
The main setting items are as follows.
● Snapshot Setting
• Name
• Number of Generations
• Schedule
3 Click the [Set] button.
A confirmation screen appears.
4 Click the [OK] button.
Setting of the Snapshot starts.
5 Click the [Done] button to return to the [Snapshot] screen.
If an error screen appears under the following conditions, check the parameter settings.
• "Name" does not satisfy the input conditions
• The total for the "Number of Generations" exceeds the maximum number for each model
To Next Page
Loading...
