Chapter 4 Connectivity Management
4.1 Host Affinity Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
339
■ When "Host Group - CA Port Group" is selected for "Target Connection"
The procedure to create a host affinity is as follows:
1 Click [Create Host Affinity] in [Action].
2 Click the [Browse...] button for the host group.
The [Select Host Group] screen appears.
3 Select the connection target.
■ When "Host Group" is selected
(1) Select a host group to configure a host affinity, and click the [OK] button.
The display returns to the initial screen.
To Next Page
Loading...
