Chapter 4 Connectivity Management
4.1 Host Affinity Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
341
5 Select a CA port group to configure a host affinity, and click the [OK] button.
The display returns to the initial screen.
6 Click the [Browse...] button for the LUN group.
The [Select LUN Group] screen appears.
• If a specific host group has been selected in the "Host Group" field, CA port groups for which the
affinity mode is "OFF" are not displayed.
• If "All" has been selected in the "Host Group" field, CA port groups with any of the following
conditions are not displayed:
- The affinity mode is "ON"
- Member CA ports that used in other CA port groups
- CA port groups that are being used by other host affinities
To Next Page
Loading...
