Chapter 4 Connectivity Management
4.1 Host Affinity Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
352
■ When selecting a host affinity for "Host Group - CA Port Group"
The procedure to modify a host affinity is as follows:
1 Select the host affinity to be modified, and click [Modify Host Affinity] in [Action].
2 Check the display contents of the host group.
The next step that needs to be performed depends on the display contents of the host group.
■ When the selected host group is "All (host response name)"
(1) Click the [Browse...] button.
The [Select Host Group] screen appears. Proceed to Step 3
.
■ When the host group is not "All (host response name)"
Proceed to Step 4
.
To Next Page
Loading...
