Chapter 1 System Management
1.4 System Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
40
2 Specify the parameters.
The main setting items are as follows.
● Setup Subsystem Parameters
• Thin Provisioning Allocation Mode
● Setup Host
• Load Balance
• Reject INQUIRY from Unauthorized Host
● Setup Disk Drive
• Copybackless
● Web GUI Settings
• Function to Add Host
3 Click the [Set] button.
A confirmation screen appears.
4 Click the [OK] button.
Setting of the subsystem parameter starts.
5 Click the [Done] button to return to the [System Settings] screen.
To Next Page
Loading...
