Chapter 4 Connectivity Management
4.2 Host Group Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
402
3 Add or delete a host in a host group in the following procedures.
■ When adding or deleting a host by selecting from the host list
(1) Click the [Registered And Now Connected] tab.
(2) Add or delete hosts.
The main setting item is as follows.
● Host Group Setting
• Checkbox to select a host
Filter setting
Filter Description
SAS Address
Input the SAS address that is to be displayed.
SAS hosts matching or partially matching the entered SAS address are displayed.
When not using the SAS address for filtering, leave this item blank.
Other Host Group
Input the other host group name that is to be displayed.
SAS hosts which belong to any host groups that match or partially match the entered
name are displayed.
When not using the host group name for filtering, leave this item blank.
Host Response
Select the host response that is to be displayed.
Any SAS hosts that are allocated to the selected host response are displayed.
To Next Page
Loading...
