Chapter 1 System Management
1.4 System Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
42
2 Select the encryption mode.
The main setting item is as follows.
● Setup Encryption Mode
• Encryption Mode
3 Click the [Set] button.
A confirmation screen appears.
4 Click the [OK] button.
The encryption mode setting is performed.
5 Click the [Done] button to return to the [System Settings] screen.
If the [Set] button is clicked when encrypted volumes or volumes being encrypted exist, an error
screen is displayed.
When disabling the encryption mode, reboot the ETERNUS DX.
To Next Page
Loading...
