Chapter 4 Connectivity Management
4.5 Host Response Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
476
For details on the parameters for this function, refer to "A.4.5.2 Modify Host Response" (page 877).
The procedure to modify a host response is as follows:
1 Select the host response to be modified, and click [Modify Host Response] in [Action].
2 Modify the host response name or each item.
The main setting items are as follows.
● Host Response Name
• Name
● ALUA Settings
• Asymmetric / Symmetric Logical Unit Access
• TPGS Mode
• TPG Referrals Mode
Other Settings
Command Monitor Time Available N/A
Load Balance Response Status Available N/A
iSCSI Discovery Reply Mode Available N/A
iSCSI Reservation Range N/A Available
Category Parameter Online modification is
available
Online modification is
not available
To Next Page
Loading...
