Fujitsu Eternus DX600 S3 - Page 516

Chapter 4 Connectivity Management
4.8 NAS Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
516
For details on the parameters for this function, refer to "A.4.7.7 Set Authentication Server" (page 896).
The procedure to set an authentication server is as follows:
Procedure
1 Click [Set Authentication Server] in [Action].
2 Specify parameters.
The main setting items are as follows.
● Active Directory (Kerberos) Authentication Settings
• Domain Name
• Domain Administrator
• Change Password
• Domain Administrator's Password
• Confirm Password
• Authentication Server (1)
• Authentication Server (2)
• Authentication Server (3)
● LDAP Authentication Settings
• Domain Name
• Domain Administrator
• Change Password
• Domain Administrator's Password
• Confirm Password
• Authentication Server (1)
• Authentication Server (2)
• Authentication Server (3)