Chapter 5 RAID Group Management
5.3 Rename RAID Group
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
537
3 Click the [Rename] button
A confirmation screen appears.
4 Click the [OK] button.
Changing RAID group name starts.
5 Click the [Done] button to return to the [RAID Group] screen.
If an error screen appears under the following conditions, check the parameter settings.
• When new RAID group name is not input
• When the RAID group name does not satisfy the input conditions
• When inputting the existing RAID group name (when one RAID group is selected)
• When the "Start of Suffix" is not specified (when multiple RAID groups are selected)
• When the value in the "Start of Suffix" does not satisfy the input conditions (when multiple RAID
groups are selected)
To Next Page
Loading...
