Fujitsu Eternus DX600 S3 - Page 546

Chapter 5 RAID Group Management
5.6 Modify RAID Group Parameters
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
546
The procedure to change the RAID group parameters is as follows:
Procedure
1 Select which RAID groups to change the RAID group parameters for (multiple selections can
be made) and click [Modify RAID Group Parameters] in [Action].
2 Specify the RAID group parameters.
3 Click the [Modify] button
 A confirmation screen appears.
4 Click the [OK] button.
 The RAID group parameter modification starts.
5 Click the [Done] button to return to the [RAID Group] screen.
End of procedure
A confirmation screen with a warning message appears.