Chapter 6 Thin Provisioning Pool Management
6.1 Set Thin Provisioning
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
558
The procedure to switch between "Enable" or "Disable" for the Thin Provisioning function and set the
maximum pool capacity in the ETERNUS DX are as follows:
1 Click [Set Thin Provisioning] in [Action].
2 Select whether to enable or disable the Thin Provisioning function and specify the
maximum pool capacity.
The main setting items are as follows.
● Thin Provisioning Settings
• Thin Provisioning
• Maximum Pool Capacity
3 Click the [Set] button.
A confirmation screen appears.
4 Click the [OK] button.
The Thin Provisioning setting starts.
5 Click the [Done] button to return to the [Setting] screen.
To Next Page
Loading...
