Chapter 6 Thin Provisioning Pool Management
6.2 Create Thin Provisioning Pool
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
565
3 Click the [Add] button.
The [Add RAID Group] screen is displayed.
4 Select the Controlling CM of the RAID group and all the drives to be registered in the RAID
group.
■ Selecting drives from a list of the drives
Click the [Tabular] tab to select drives from the list. Only unused drives are displayed on the list.
The main setting items are as follows.
• Checkbox to select drives
■ Selecting drives from the installation location image
Click the [Graphic] tab to select drives from the drive installation image. The installation images of all
the drives installed in the ETERNUS DX are displayed. Checkboxes are displayed for unused drives.
To Next Page
Loading...
