Chapter 7 Advanced Copy Management
7.8 REC Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
615
The procedure to set an REC copy path is as follows:
Operation Mode Selection
In this screen, select the operation mode.
1 Click [Set Copy Path] in [Action].
2 Select the operation mode.
The main setting item is as follows.
● Operation Mode Selection
• Operation Mode
3 Click the [Next >>] button.
The displayed screen is different depending on the selected operation.
■ When selecting "Create Copy Path"
The [Base Information Selection] screen appears. Proceed to "Register Storage System Information
(Register)" (page 616).
■ When selecting "Apply Copy Path"
The [Copy Path Information File Selection] screen appears. Proceed to "Select Copy Path Information"
(page 625).
To Next Page
Loading...
