Chapter 1 System Management
1.5 Utility Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
65
2 Click the [Shutdown] button.
A confirmation screen appears.
3 Click the [OK] button.
The ETERNUS DX shuts down after 30 seconds.
■ Restart the ETERNUS DX
The procedure to restart the ETERNUS DX is as follows:
1 Click [Shutdown/Restart] in [Action].
Note that the ETERNUS DX may reboot automatically when "Setup Power Management" is enabled.
To Next Page
Loading...
