Chapter 7 Advanced Copy Management
7.8 REC Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
657
The procedure to modify REC multiplicity is as follows:
1 Click the [Modify REC Multiplicity] in [Action].
2 Specify the multiplicity.
The main setting items are as follows.
● Remote Box ID List
• Priority Level
• Specification Mode
• Multiplicity
3 Click the [Set] button
A confirmation screen appears.
4 Click the [OK] button.
The REC multiplicity settings starts.
5 Click the [Done] button to return to the [Copy Path] screen.
When "Manual" is selected for "Specification Mode" and numeric characters exceed the allowed range
(from 1 to 1024), an error screen appears. If this occurs, check the parameter settings.
Click [Advanced Setting] to specify the copy schedule mode.
To Next Page
Loading...
