EasyManua.ls Logo

Fujitsu Eternus DX600 S3 - Page 677

Fujitsu Eternus DX600 S3
1082 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Appendix A Parameter List
A.1 System Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
677
Web GUI Settings
Function to Add Host
A.1.3.5 Setup Encryption Mode
For details about this function, refer to "1.4.5 Setup Encryption Mode" (page 41).
For the factory default settings for this function, refer to "Appendix B Setup Encryption Mode" (page 973)
.
Setup Encryption Mode
Encryption Mode
Description Select which function for adding hosts is to be used.
"Use "Add Host Group"" checkbox
Create a host group and register the hosts as members. When the "Use "Add Host
Group"" checkbox is selected, the actions for creating host groups are displayed.
"Use "Add Host"" checkbox
Register hosts without creating host groups. When the "Use "Add Host"" checkbox is
selected, the actions for adding hosts are displayed.
Input condition/
Display contents
"Use "Add Host Group"" checkbox
- Selected
- Cleared
"Use "Add Host"" checkbox
- Selected
- Cleared
Selecting either "Use "Add Host Group"" or "Use "Add Host"" is recommended. If both of these checkboxes are not
selected, the [Set] button cannot be clicked.
Select "Use "Add Host"" only when using the previous procedure for registering hosts as the older storage systems
(such as ETERNUS DX410/DX440 and ETERNUS DX8100/DX8400/DX8700). This checkbox is not selected by default.
Both checkboxes can be selected at the same time.
Description The current encryption mode is displayed.
When changing the encryption mode, select "Disable", "Fujitsu Original Encryption" or
"AES".
Input condition/
Display contents
Disable
"Disable" means no encryption function is used. When changing the encryption
mode from "Fujitsu Original Encryption" to "Disable" or from "AES" to "Disable",
reboot the ETERNUS DX.
Fujitsu Original Encryption
"Fujitsu Original Encryption" is an encryption method which uses a Fujitsu
proprietary algorithm. Compared to AES, its practical security level is almost equal
while it allows faster processing than AES.
AES
"Advanced Encryption Standard (AES)" (standard encryption used for information
processing by the US federal government) is a standardized encryption method. The
ETERNUS DX storage systems adopt the AES 128-bit encryption.

Table of Contents

Other manuals for Fujitsu Eternus DX600 S3

Related product manuals