Chapter 1 System Management
1.5 Utility Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
70
2 Specify the interval.
The main setting item is as follows.
● Performance Monitoring
• Interval (sec.)
3 Click the [Start] button.
A confirmation screen appears.
4 Click the [OK] button.
Acquisition of performance information starts.
5 Click the [Done] button to return to the [Utility] screen.
■ Stopping performance monitoring
The [Stop] button is displayed when "Monitoring State" is "Active".
1 Click [Start/Stop Perfmon] in [Action].
If the [Stop] button is clicked after starting performance monitoring from other monitoring software,
an error screen is displayed.
To Next Page
Loading...
