Appendix A Parameter List
A.1 System Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
716
A.1.7.8 Setup SNMP Agent Trap
For details about this function, refer to "1.8.8 Setup SNMP Agent Trap" (page 123).
For the factory default settings for this function, refer to "Appendix B Setup SNMP Agent Trap" (page 981)
.
● Setup SNMP Agent Trap
• Manager No.
• SNMP Version
• Community Name
• User Name
• Port No.
Description Select a manager number.
The management number of the SNMP Agent Manager, which has been registered in
"1.8.4 Setup SNMP Manager" (page 113), is displayed as an option.
Input condition/
Display contents
Manager01 - Manager10
Description Select the trap SNMP version.
Input condition/
Display contents
• v1
• v2c
• v3
Description Select the community name used when sending a trap.
The community name, which has been registered in "1.8.7 Setup SNMP Agent
Community" (page 120), is displayed as an option.
If the SNMP version is "v1" or "v2c", the "Community Name" must be specified.
Input condition/
Display contents
Community names that are registered by using the [Setup SNMP Agent Community]
function
Description Select the user name used when sending a trap.
The user name, which has been registered in "1.8.6 Setup SNMP Agent User" (page 117)
,
is displayed as an option.
If the SNMP version is "v3", the "User Name" must be specified.
Input condition/
Display contents
User names that are registered by using the [Setup SNMP Agent User] function
Description Input the port number of the trap destination.
When changing a port number, input a unique port number.
Input condition/
Display contents
1 - 65535
To Next Page
Loading...
