Fujitsu Eternus DX600 S3 - Page 721

Appendix A Parameter List
A.1 System Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
721
• LAN Port
A.1.7.12 Setup SSH Server Key
For details about this function, refer to "1.8.14 Setup SSH Server Key" (page 134).
For the factory default settings for this function, refer to "Appendix B Setup SSH Server Key" (page 982)
.
● SSH Server Key Setting
• Key Length
A.1.7.13 Create Self-signed SSL Certificate
For details about this function, refer to "1.8.15 Create Self-signed SSL Certificate" (page 135).
For the factory default settings for this function, refer to "Appendix B Create Self-signed SSL Certificate" (page
982).
● Create Self-signed SSL Certificate Setting
• Key Length
Description Input the LAN port number that is used to send Syslog.
Input condition/
Display contents
• MNT
• RMT
Description Select the SSH server key length.
The SSH server key length is equivalent to the encryption level. In general, the longer
the key is, the higher the encryption level becomes (difficult to decrypt the encrypted
data).
Input condition/
Display contents
• 1024 bit
• 2048 bit
• 4096 bit
Description Select the SSL server key length.
The SSL server key length is equivalent to the encryption level. In general, the longer the
key is, the higher the encryption level becomes (difficult to decrypt the encrypted data).
Input condition/
Display contents
• 1024 bit
• 2048 bit
• 4096 bit