Fujitsu Eternus DX600 S3 - Page 723

Appendix A Parameter List
A.1 System Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
723
A.1.7.14 Create Key/CSR
For details about this function, refer to "1.8.16 Create Key/CSR" (page 137).
For the factory default settings for this function, refer to "Appendix B Create Key/CSR" (page 982)
.
● Create Key/CSR Setting
• Key Length
• Country Name
• State or Province Name
• Locality Name
• Organization Name
Description Select the SSL server key length.
The SSL server key length is equivalent to the encryption level. In general, the longer the
key is, the higher the encryption level becomes (difficult to decrypt the encrypted data).
Input condition/
Display contents
• 1024 bit
• 2048 bit
• 4096 bit
Description Input the country code which conforms to ISO-3166 A2 (required).
[Example] Japan: JP
Input condition/
Display contents
• Alphabetic characters (upper case) (A - Z)
• Two fixed letters
Description Input the prefecture where the organization is located (required).
[Example] Kanagawa
Input condition/
Display contents
• Up to 63 alphabetic characters (A - Z, a - z)
• Spaces
Description Input the municipality where the organization is located (required).
[Example] Kawasaki
Input condition/
Display contents
• Up to 63 alphabetic characters (A - Z, a - z)
• Spaces
Description Input the organization name (required).
[Example] XXX LIMITED
Input condition/
Display contents
• Up to 63 alphanumeric characters (A - Z, a - z, 0 - 9)
• Spaces