Appendix A Parameter List
A.1 System Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
752
A.1.10.2 Add Key Server
For details about this function, refer to "1.11.2 Add Key Server" (page 168).
For the factory default settings for this function, refer to "Appendix B Add Key Server" (page 983)
.
● Key Server Setting
• Domain Name / IP Address
• Port No.
• LAN Port
Description Input the domain name (FQDN) or the IP address of the key server.
There are two methods to specify an IP address; "IPv4" and "IPv6". The following IPv6
addresses can be used; "link local address", "global address", "unique local address", or
"6to4 address". Refer to "Available IPv6 Address" (page 107)
for details. When the
current setting is displayed, the IPv6 address is displayed as an abbreviation.
Input condition/
Display contents
• For IPv4 address
xxx.xxx.xxx.xxx
xxx: 1 - 255 for the top field (decimal)
xxx: 0 - 255 for other fields (decimal)
• For IPv6 address
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx
xxxx: 0 - ffff (FFFF) (hexadecimal, alphanumeric characters)
Refer to "IPv6 Address Notation (Setup Network Environment)" (page 107)
for
details.
• For domain name
Up to 63 alphanumeric characters and symbols
Description Input the port number used to communicate with the key server.
Input condition/
Display contents
• Numeric characters
• 1 - 65535
Description Select the LAN port used to communicate with the key server.
Input condition/
Display contents
• MNT
• RMT
To Next Page
Loading...
