Fujitsu Eternus DX600 S3 - Page 774

Appendix A Parameter List
A.1 System Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
774
• Day of the Week
● Manual Transmission
• Incident Number
• Include I/O Module log
• Time Range Specified
• Start Time
Description Specify the day of the week when sending logs periodically.
The day of the week can be specified only when "Once per Week" has been specified as
the period when sending logs periodically. A day between "Monday" and "Friday" is set
for the default setting. (*1)
*1: Different days and times are specified in the factory settings in order to disperse
the load on the REMCS center.
Input condition/
Display contents
• Sunday
• Monday
• Tuesday
• Wednesday
• Thursday
• Friday
• Saturday
• Undefined (any day from Monday to Friday)
Different days are specified in the factory settings.
Description Input the incident number that is to be added to the log to be sent.
Input condition/
Display contents
Up to 15 alphanumeric characters and symbols (except space)
Description When exporting the I/O module logs, select "Yes". When not exporting, select "No".
Input condition/
Display contents
• Yes
• No
Description Select whether to specify the time range to collect logs.
To specify the time to send log, select the "Specify" checkbox, and specify the start and
end time.
If the time range has been specified, some of the logs just before and after the specified
time range may also be collected.
Input condition/
Display contents
"Specify" checkbox
• Selected
• Cleared
Description When "Specify" has been selected for "Time Range Specified", specify the start time for
collecting logs.
Input condition/
Display contents
YYYY-MM-DD hh:mm:ss (YYYY: Year (AD), MM: Month (01 - 12), DD: Date (01 - 31), hh:
Hour (00 - 23), mm: Minute (00 - 59), ss: Second (00 - 59))