Appendix A Parameter List
A.3 Volume Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
794
• RAID Level
• Number of Member Drives
• Stripe Depth
Description Select the RAID level.
If there are no RAID groups in which volumes can be created, the field is blank.
Input condition/
Display contents
• High Performance (RAID1+0)
• High Capacity (RAID5)
• High Reliability (RAID6)
• Reliability (RAID5+0)
• Mirroring (RAID1)
• Striping (RAID0)
Description Select the number of member drives in the RAID group.
The selectable number of member drives, which is determined by the specified RAID
level, is displayed.
If there are no RAID groups in which volumes can be created, the field is blank.
Input condition/
Display contents
• For High Performance (RAID1+0)
4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30, 32
• For High Capacity (RAID5)
3 - 16
• For High Reliability (RAID6)
5 - 16
• For Reliability (RAID5+0)
6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30, 32
• For Mirroring (RAID1)
2
• For Striping (RAID0)
2 - 16
Description Select the Stripe Depth of the RAID group.
The selectable Stripe Depth varies depending on the specified RAID level. Refer to
"Available Stripe Depth value (for RAID group)" (page 913)
for details.
If "Mirroring (RAID1)" is selected as the RAID level, a "-" (hyphen) is displayed.
If there are no RAID groups in which volumes can be created, the field is blank.
Input condition/
Display contents
• 64 KB
• 128 KB
• 256 KB
• 512 KB
• 1024 KB
• "-" (hyphen)
To Next Page
Loading...
