Fujitsu Eternus DX600 S3 - Page 818

Appendix A Parameter List
A.4 Connectivity Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
818
Host responses and recognizable LUNs
• Recommended Patterns of Host Responses
OK: Available, N/A: Not available
• Example of host responses in the ETERNUS DX
OK: Available, N/A: Not available
*1: "PRHL" indicates "Peripheral device addressing (Default)" and "FLAT" indicates "Flat space addressing".
• Checkbox to select a host
● Host Setting
• WWN
Item Default Solaris
MPxIO
HP-UX AIX AIX
VxVM
VS850/
SVC
BS
2000
Host Response
LUN Addressing
(*1)
PRHL PRHL FLAT FLAT FLAT PRHL PRHL
LUN Expand Mode
(Peripheral Device
Addressing)
Disabl
e
(Defau
lt)
Disabl
e
(Defau
lt)
Disabl
e
(Defau
lt)
Disabl
e
(Defau
lt)
Disabl
e
(Defau
lt)
Disabl
e
(Defau
lt)
Enable
Recognizable LUNs
256
LUN
256
LUN
4096
LUN
4096
LUN
4096
LUN
256
LUN
4096
LUN
LUN settings for
LUN groups with
host affinity
settings
LUN#0 - LUN#255 OK OK OK OK OK OK OK
LUN#0 -
LUN#4095
N/A N/A OK OK OK N/A OK
Item HR 1 HR 2 HR 3
Host Response
LUN Addressing
(*1)
PRHL PRHL FLAT
LUN Expand Mode
(Peripheral Device
Addressing)
Disable
(Default)
Enable
Disable
(Default)
Recognizable LUNs 256 LUNs 4096 LUNs 4096 LUNs
LUN settings for
LUN groups with
host affinity
settings
LUN#0 - LUN#255 OK OK OK
LUN#0 -
LUN#4095
N/A OK OK
Description Select the FC host checkbox to be registered in a host group.
Input condition/
Display contents
Checkbox
• Selected
• Cleared
FC hosts that are set for the host affinity of which the Virtual Volume function is enabled are not displayed.
Description Input the WWN for the FC host.
Input condition/
Display contents
• Hexadecimal numbers (0 - 9, A - F, a - f)
• 16 digits ("F (f)" or "0" used in entire 16 digits are not allowed)