Appendix A Parameter List
A.4 Connectivity Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
902
• Limit (File Count)
Description Change the limit value for the file count.
The current limit value for the file count is displayed when this function starts.
If "0" is entered, "Not Specified" (unlimited) is registered in the ETERNUS DX.
Input condition/
Display contents
0 - 134217723
If both the warning and limit values are specified, the limit value must be larger than the warning value.
To Next Page
Loading...
