Fujitsu Eternus DX600 S3 - Page 907

Appendix A Parameter List
A.5 RAID Group Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
907
• Fast Recovery Configuration
• RAID Group Capacity
● Drive Selection ([Tabular] tab)
• Checkbox to select drives
Description Select the drive configuration for a Fast Recovery RAID group.
Select the drive configuration from "No. of drives in the configuration", "capacity
efficiency", and "rebuilding speed" according to your environment. Refer to "Drive
configuration for Fast Recovery RAID groups" (page 910) for details. The more redundant
sets there are, the faster the rebuilding becomes. This item is blank when the RAID level
is not "High Reliability (RAID6-FR)".
Input condition/
Display contents
• ETERNUS DX60 S3
- (3D+2P)x2+1HS
- (6D+2P)x2+1HS
- (9D+2P)x2+1HS
- Blank
• Other than the ETERNUS DX60 S3
- (3D+2P)x2+1HS
- (4D+2P)x2+1HS
- (6D+2P)x2+1HS
- (9D+2P)x2+1HS
- (12D+2P)x2+1HS
- (5D+2P)x4+1HS
- (13D+2P)x2+1HS
- (8D+2P)x3+1HS
- (4D+2P)x5+1HS
- (3D+2P)x6+1HS
- Blank
D: Data drives, P: Parity drives, HS: Hot Spares
Description The RAID group capacity is displayed.
The "RAID Group Capacity" is automatically calculated from the selected RAID level and
drives.
Input condition/
Display contents
Capacity of RAID group that is to be created
Description Select the checkbox for the drive to be selected.
Input condition/
Display contents
Checkbox
• Selected
• Cleared