Fujitsu Eternus DX600 S3 - Page 916

Appendix A Parameter List
A.5 RAID Group Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
916
● Drive Selection ([Graphic] tab)
• DE selection list box
• Checkbox to select drives
Description Select the DE group.
Options are displayed in the list box when at least one CE or DE in the DE group is
installed in the ETERNUS DX.
Refer to "Options and DE groups for each model" (page 908)
for details.
Input condition/
Display contents
• DE#0x
• DE#1x
• DE#2x
• DE#3x
• DE#4x
• DE#5x
• DE#6x
• DE#7x
• DE#8x
• DE#9x
• DE#Ax
• DE#Bx
Description Select the checkbox for the drive that is to be used after expansion.
Clear the checkbox for the drive that is not used after expansion.
The checkbox for the drive being used in the selected RAID group is selected.
For 2.5" DEs, drives are displayed from left to right in ascending order of the slot number.
For 3.5" DEs or 3.5" high density DEs, drives are displayed from bottom left to top right in
ascending order of the slot number.
Placing the mouse pointer on the icon displays the detailed information of the drive.
When selecting drives, refer to "Delete RAID Group" (page 535).
Input condition/
Display contents
Checkbox
• Selected
• Cleared