Fujitsu Eternus DX600 S3 - Page 943

Appendix A Parameter List
A.7 Advanced Copy Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
943
● Storage System Configuration Settings
• Port Type
Description Specify the port type to set the copy path.
The displayed contents vary depending on the storage system type.
When the target port is not used, select "-" (hyphen).
Input condition/
Display contents
• For the ETERNUS DX100 S3/DX200 S3
- FC 2-Port
- iSCSI 2-Port
- "-" (hyphen)
• For the ETERNUS DX500 S3/DX600 S3
- FC 2-Port
- FC 4-Port
- iSCSI 2-Port
- iSCSI RA (for older storage system connection)
- "-" (hyphen)
• For the ETERNUS DX8700 S3/DX8900 S3
- FC 2-Port
- FC 4-Port
- iSCSI 2-Port
- iSCSI RA (for older storage system connection)
- "-" (hyphen)
• For the ETERNUS DX200F
- FC 2-Port
- iSCSI 2-Port
- "-" (hyphen)
• For the ETERNUS DX90 S2
- FC 1-Port
- FC 2-Port
- iSCSI 1-Port
- iSCSI 2-Port
- "-" (hyphen)
• For the ETERNUS DX410 S2/DX440 S2
- FC 1-Port
- FC 2-Port
- FC 4-Port
- iSCSI 1-Port
- iSCSI 2-Port
- iSCSI RA (for older storage system connection)
- "-" (hyphen)