Fujitsu Eternus DX600 S3 - Page 959

Appendix A Parameter List
A.7 Advanced Copy Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
959
• Size
• Forwarding Interval
Description Select the REC Buffer size.
Input condition/
Display contents
• For the ETERNUS DX100 S3
- 128 MB
• For the ETERNUS DX200 S3
- 128 MB
- 256 MB
- 512 MB
• For the ETERNUS DX500 S3/DX600 S3
- 128 MB
- 256 MB
- 512 MB
- 1024 MB
- 2048 MB
• For the ETERNUS DX8700 S3/DX8900 S3
- 128MB
- 256MB
- 512MB
- 1024MB
- 2048MB
• For the ETERNUS DX200F
- 128 MB
- 256 MB
- 512 MB
• If "Unused" is selected for the usage
"-" (hyphen)
In the ETERNUS DX100 S3, a total size of 512MB of memory is reserved for the copy table and REC Buffer. If an REC
Buffer is created, 256MB (REC Buffer size, 128MB x 2) of the total memory size is used. Therefore, the maximum
table size is 256MB. Note that an REC Buffer cannot be created if the copy table size is larger than 264MB.
Description Select the data transfer intervals.
If "Unused" is selected for the usage, a "-" (hyphen) is displayed.
Input condition/
Display contents
1 sec., 2 sec., 4 sec., 8 sec., 15 sec., 30 sec., 45 sec., 60 sec., 75 sec., 90 sec., 105 sec., 120
sec., "-" (hyphen)