Fujitsu ETERNUS LT40 S2 - Figure 5.17 Confirmation of License Key; Figure 5.18 Request for Reboot

Chapter 5 Servicing the Tape Library
5.10 Adding a New License Key
FUJITSU Storage ETERNUS LT40 S2/LT60 S2 LTO Library Installing, Starting Up and Maintaining
Copyright 2018 FUJITSU LIMITED P3AM-5392-07ENZ0
100
3 Add the new license key.
After confirming the key, the licensed functions (activated magazines or partitions) are displayed in a
table in the bottom line.
You are asked, whether you are sure that the new license key is correct:
Figure 5.17 Confirmation of license key
4 You are requested to reboot the system:
Figure 5.18 Request for reboot
If you press
Refresh , a reboot is executed.
After confirmation the license key is added.
End of procedure