Fujitsu ETERNUS LT40 S2 - Figure 2.4 Shipping Lock and Label; Figure 2.5 Shipping Lock and Label on the Rear Panel

Chapter 2 Installing the Tape Library
2.4 Removing the Shipping Lock
FUJITSU Storage ETERNUS LT40 S2/LT60 S2 LTO Library Installing, Starting Up and Maintaining
Copyright 2018 FUJITSU LIMITED P3AM-5392-07ENZ0
25
To remove and store the shipping lock:
Procedure
1 Remove the yellow label that is securing the lock to the top of the library, and then remove
the lock (see Figure 2.4
).
Figure 2.4 Shipping lock and label
2 Store the lock and label on the rear panel of the library (see Figure 2.5).
Figure 2.5 Shipping lock and label on the rear panel
End of procedure
If you need to transport the library, we recommend that the shipping lock and label is replaced on the top
cover (see "Chapter 7
Packaging Before Transportation" (page 104)).
1
2
1
2