Fujitsu ETERNUS LT40 S2 - 4.4 Magazine Does not Unlock via OCP or RMU

Chapter 4 Troubleshooting
4.4 Magazine Does not Unlock via OCP or RMU
FUJITSU Storage ETERNUS LT40 S2/LT60 S2 LTO Library Installing, Starting Up and Maintaining
Copyright 2018 FUJITSU LIMITED P3AM-5392-07ENZ0
77
4.4 Magazine Does not Unlock via OCP or RMU
If you are not able to remove the magazines using OCP and RMU, an emergency release mechanism is
available.
Procedure
1 Unplug the power cord from the library.
2 Find the access holes for the right and left magazines. See Figure 4.2.
Figure 4.2 Access holes for the left and right magazine
Table 4.2 Access to manually release a magazine
WARNING
Use only in case of emergency!
No. Description
1Right magazine release
2 Left magazine release