Fujitsu ETERNUS LT40 S2 - Figure 2.13 Remove the Flange Cover; Figure 2.14 Screwing on the Library

Chapter 2 Installing the Tape Library
2.5 Rack Mounting the Library
FUJITSU Storage ETERNUS LT40 S2/LT60 S2 LTO Library Installing, Starting Up and Maintaining
Copyright 2018 FUJITSU LIMITED P3AM-5392-07ENZ0
31
8 Put the library from the front of the rack on the support angles of the sliding rails and push
it into the rack to the back stop.
9 Remove the flange cover on the left hand side.
Figure 2.13 Remove the flange cover
10 Screw on the library at the front to the inserted cage nuts as shown below.
Figure 2.14 Screwing on the library
End of procedure