Fujitsu ETERNUS LT40 S2 - Chapter 7 Packaging Before Transportation

FUJITSU Storage ETERNUS LT40 S2/LT60 S2 LTO Library Installing, Starting Up and Maintaining
Copyright 2018 FUJITSU LIMITED P3AM-5392-07ENZ0
104
Chapter 7
Packaging Before Transportation
Procedure
1 Please disconnect the Library.
2 Remove the yellow label and the shipping lock. The shipping lock is stored on the rear panel
(see Figure 7.1
).
3 Store the lock and the label on the top cover.
The shipping lock prevents the robotic mechanism from moving during shipment.
Figure 7.1 Replacing shipping lock before transportation
4 Before sending the defect Library back, please contact the service department to give the
informations of the Part and Serial Numbers (see Figure 7.2
).
If you need to transport the library, it is recommended that the shipping lock and label is replaced on the top
cover (see
Figure 7.1).
1
4
5
3
2