Fujitsu ETERNUS LT40 S2 - Figure 5.14 License Key

Chapter 5 Servicing the Tape Library
5.10 Adding a New License Key
FUJITSU Storage ETERNUS LT40 S2/LT60 S2 LTO Library Installing, Starting Up and Maintaining
Copyright 2018 FUJITSU LIMITED P3AM-5392-07ENZ0
98
Figure 5.14 License key
4 Use the Next button [▼] and the Previous button [▲] to choose the requested digit for the
key (alphabetic or numeric character). Press
Enter to move to the next digit or Cancel to get
back.
5 If the license key is complete, choose Activate .
End of procedure
After activation of the license key a reboot is requested. You have 3 different possibilities to start the reboot:
• Reboot via OCP.
• Power cycle the storage system.
• Reboot via RMU (see Figure 5.18
).