Chapter 3 Operating the Tape Library
3.5 Remote Management Unit (RMU)
FUJITSU Storage ETERNUS LT40 S2/LT60 S2 LTO Library Installing, Starting Up and Maintaining
Copyright 2018 FUJITSU LIMITED P3AM-5392-07ENZ0
64
Figure 3.29 ETERNUS LT40 S2: Configuration, Date/Time page
3.5.6.8 Setting Error Log Mode
This page allows service personnel to set the error log mode to
Off, Continuous,
or to
Stop Trace At First Error.
Figure 3.30 ETERNUS LT40 S2: Configuration, Log page
3.5.6.9 Setting Event Notification Parameters
This page allows the user to set the event notification to On.
To use this function, the Host Name and the Domain Name must be set. For details, refer to "3.5.6.4
Changing
the Network Configuration" (page 57).
Choices for the event notification are:
• Event Notification
Select this item to be notified of library errors via email
• Notification Level
Specify at which type of error/warning you would like to be informed via email
• To Email Address
Enter the email address of the individual you would like to receive the errors and/or warnings
The trace level and trace filter selection options are only changeable by Service personnel.
To Next Page
Loading...
