Chapter 3 Operating the Tape Library
3.5 Remote Management Unit (RMU)
FUJITSU Storage ETERNUS LT40 S2/LT60 S2 LTO Library Installing, Starting Up and Maintaining
Copyright 2018 FUJITSU LIMITED P3AM-5392-07ENZ0
57
3.5.6.3 Changing the Drive Configuration
This page shows the current configuration of all drives in the library and allows modification to the
configuration. The user is also able to select Power on through this page which activates the drive.
Figure 3.17 ETERNUS LT40 S2: Configuration, Drive page
3.5.6.4 Changing the Network Configuration
This page shows the current network configuration of the library and allows modification to the configuration.
When a change is requested, a pop-up box will ask to confirm the changes.
A list of changes that can be made is:
• Host Name
• Domain Name
• IPv4
- DHCP Address
- Static Address
- Subnet Mask
- Gateway Address
- IPv4 DNS Server 1 and 2
• IPv6
- IPv6 DNS Server 1 and 2
- Stateless Auto Config Address
- DHCPv6 Addressing
- Static Addressing
- Static Assigned Address
• Enable SSL for Web
To Next Page
Loading...
